Skip to main content

How to Troubleshoot an LG Washer That’s Not Draining

 

If your LG washer isn’t draining and your clothes come out soaking wet after a cycle, don’t worry—you’re not alone. This is a common issue with a few likely causes. In this guide, we’ll walk you through the most common reasons your LG washer won’t drain and show you how to fix them.

1. Check for a Kinked or Clogged Drain Hose

One of the first things to inspect is the drain hose. If it’s kinked, twisted, or clogged, water can’t flow out properly.

How to check it:

  • Unplug the washer and move it slightly away from the wall.

  • Inspect the drain hose for any visible kinks or bends—straighten them if you find any.

  • Detach the hose and check for blockages. You can run water through it or use a small brush to clear out debris.

  • Reconnect the hose and test the machine.

If the water still doesn’t drain, the issue might be deeper in the hose or the pump system.

2. Clean the Coin Trap or Pump Filter

Another common culprit is a dirty coin trap or pump filter—these parts collect lint, small items, and debris to prevent them from damaging the pump.

How to clean the coin trap (front-load models):

  • Unplug the washer.

  • Locate the coin trap on the lower front panel.

  • Place a towel under it and twist open the cover.

  • Remove any lint, coins, or debris inside, then rinse and reinstall.

For top-load models: the coin trap is usually found at the back of the machine. Follow the same steps to clean it.

To clean the pump filter:

  • The filter sits beneath the washer tub. You’ll need to remove the lower panel or tub to reach it.

  • Unscrew the retaining nut and remove the filter.

  • Clean it thoroughly and reinstall.

3. Inspect the Drain Pump for Blockages

A blocked drain pump can also prevent your LG washer from draining. In some cases, you might even notice an unpleasant odor coming from the washer.

How to check:

  • Unplug the washer.

  • Detach the drain hose and locate the pump (usually near the bottom of the machine).

  • Remove any visible debris or lint blocking the impeller.

  • Once clear, reattach the hose and plug in the washer to test it.

If the pump makes unusual noises or doesn’t run, it may need to be replaced.

4. Test the Lid Switch

On some LG top-load washers, a faulty lid switch can stop the washer from draining. The machine won’t advance to the spin or drain cycle if the switch doesn’t detect that the lid is closed.

How to test it:

  • Unplug the washer and open the lid.

  • Locate the lid switch and test it using a multimeter for continuity.

  • If the switch fails the test, replace it with a compatible part for your model.

5. Call a Professional LG Washer Repair Technician

If you’ve checked all of the above and your washer still won’t drain, it’s time to call a professional. A qualified LG washer repair technician can safely diagnose the problem and perform any necessary repairs—especially if the issue involves the control board, motor, or electrical components.

DIY troubleshooting can save time and money, but complex washer issues are best handled by an expert to avoid further damage.

Final Tip

To prevent future drainage problems, clean your washer’s filters regularly, inspect the drain hose every few months, and avoid overloading your machine. A little maintenance goes a long way toward keeping your LG washer draining properly and your laundry routine running smoothly.

Comments

Post a Comment

Popular posts from this blog

How to Fix My Refrigerator: A Basic Refrigerator Repair Guide

 Your refrigerator is one of the hardest-working appliances in your home — running 24/7 to keep your food fresh and safe. But like any appliance, it can sometimes show signs of trouble. Whether it’s leaking water, making strange noises, or not cooling properly , it can be stressful to figure out what’s wrong. The good news? Not every refrigerator problem requires calling a repair technician right away. Some issues have simple fixes you can do yourself. Here’s a quick and practical refrigerator repair guide to help you troubleshoot common issues before calling in the professionals. 1. Water Leaking from the Bottom of the Fridge If you notice water pooling under your refrigerator — don’t panic! In most cases, this is an easy fix . Start by checking: Defrost drain – It might be clogged with ice or debris . Try flushing it out with warm water. Door gasket – A worn or misaligned seal can cause condensation and leaks. Inspect it for cracks or dirt buildup. Drain pan –...
Post a Comment
Read more

Knowing When to Upgrade Your Kitchen Appliances

 You should think about upgrading your kitchen appliances when you begin to notice reduced performance, frequent repairs, or rising energy costs. Difficulty in finding replacement parts is another clear indicator. Modern appliances not only bring advanced technology and energy efficiency but also enhance the visual appeal of your kitchen. Upgrading can even increase your property’s overall value while improving your day-to-day convenience. Evaluating the Lifespan of Your Appliances Before committing to a full kitchen upgrade, take a closer look at the current condition of your appliances. Are they still functioning efficiently, or are they showing their age? Assessing appliance lifespan isn’t just about how long you’ve owned them—it’s also about how well they perform. Budget is an important consideration. It’s unnecessary to replace an appliance that’s still efficient, but older models typically consume more energy and may carry potential safety risks. Balancing your spending wi...
1 comment
Read more

7 Reasons Why You Should Use Jet-Dry in Your Dishwasher

 Most households across the U.S. own a dishwasher — and for good reason. These machines save time, conserve water, and make cleanup more convenient. However, many people still don’t use their dishwashers as often as they could. In fact, studies show that around 19% of homeowners didn’t use their dishwasher at all in 2020. Some prefer handwashing, believing it gets dishes cleaner. If inefficiency or poor cleaning results are keeping you from using your dishwasher, it’s time to try Jet-Dry. This simple rinse aid can drastically improve performance and cleanliness, making your dishwasher work at its best. Here are seven reasons why Jet-Dry deserves a place in your kitchen. 1. Eliminate Film and Water Spots on Dishes Few things are more frustrating than unloading your dishwasher only to find cloudy film or water spots. Jet-Dry tackles this issue head-on. Thanks to its main ingredient, alcohol ethoxylate , Jet-Dry creates a thin, protective layer on your dishes — much like a wax...
Post a Comment
Read more